1
0
Weather_ESP/components/sensors/bme280.h

247 lines
8.8 KiB
C
Raw Normal View History

/**
* Copyright (c) 2020 Bosch Sensortec GmbH. All rights reserved.
*
* BSD-3-Clause
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* @file bme280.h
* @date 21/01/2020
* @version 3.4.2
*
*/
/*! @file bme280.h
* @brief Sensor driver for BME280 sensor
*/
/*!
* @defgroup BME280 SENSOR API
*/
#ifndef BME280_H_
#define BME280_H_
/*! CPP guard */
#ifdef __cplusplus
extern "C" {
#endif
/* Header includes */
#include "bme280_defs.h"
/*!
* @brief This API is the entry point.
* It reads the chip-id and calibration data from the sensor.
*
* @param[in,out] dev : Structure instance of bme280_dev
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_init(struct bme280_dev *dev);
/*!
* @brief This API writes the given data to the register address
* of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be written.
* @param[in] reg_data : Pointer to data buffer which is to be written
* in the sensor.
* @param[in] len : No of bytes of data to write..
* @param[in] dev : Structure instance of bme280_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len, const struct bme280_dev *dev);
/*!
* @brief This API reads the data from the given register address of the sensor.
*
* @param[in] reg_addr : Register address from where the data to be read
* @param[out] reg_data : Pointer to data buffer to store the read data.
* @param[in] len : No of bytes of data to be read.
* @param[in] dev : Structure instance of bme280_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len, const struct bme280_dev *dev);
/*!
* @brief This API sets the oversampling, filter and standby duration
* (normal mode) settings in the sensor.
*
* @param[in] dev : Structure instance of bme280_dev.
* @param[in] desired_settings : Variable used to select the settings which
* are to be set in the sensor.
*
* @note : Below are the macros to be used by the user for selecting the
* desired settings. User can do OR operation of these macros for configuring
* multiple settings.
*
* Macros | Functionality
* -----------------------|----------------------------------------------
* BME280_OSR_PRESS_SEL | To set pressure oversampling.
* BME280_OSR_TEMP_SEL | To set temperature oversampling.
* BME280_OSR_HUM_SEL | To set humidity oversampling.
* BME280_FILTER_SEL | To set filter setting.
* BME280_STANDBY_SEL | To set standby duration setting.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme280_set_sensor_settings(uint8_t desired_settings, const struct bme280_dev *dev);
/*!
* @brief This API gets the oversampling, filter and standby duration
* (normal mode) settings from the sensor.
*
* @param[in,out] dev : Structure instance of bme280_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme280_get_sensor_settings(struct bme280_dev *dev);
/*!
* @brief This API sets the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme280_dev.
* @param[in] sensor_mode : Variable which contains the power mode to be set.
*
* sensor_mode | Macros
* ---------------------|-------------------
* 0 | BME280_SLEEP_MODE
* 1 | BME280_FORCED_MODE
* 3 | BME280_NORMAL_MODE
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_set_sensor_mode(uint8_t sensor_mode, const struct bme280_dev *dev);
/*!
* @brief This API gets the power mode of the sensor.
*
* @param[in] dev : Structure instance of bme280_dev.
* @param[out] sensor_mode : Pointer variable to store the power mode.
*
* sensor_mode | Macros
* ---------------------|-------------------
* 0 | BME280_SLEEP_MODE
* 1 | BME280_FORCED_MODE
* 3 | BME280_NORMAL_MODE
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_get_sensor_mode(uint8_t *sensor_mode, const struct bme280_dev *dev);
/*!
* @brief This API performs the soft reset of the sensor.
*
* @param[in] dev : Structure instance of bme280_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error.
*/
int8_t bme280_soft_reset(const struct bme280_dev *dev);
/*!
* @brief This API reads the pressure, temperature and humidity data from the
* sensor, compensates the data and store it in the bme280_data structure
* instance passed by the user.
*
* @param[in] sensor_comp : Variable which selects which data to be read from
* the sensor.
*
* sensor_comp | Macros
* ------------|-------------------
* 1 | BME280_PRESS
* 2 | BME280_TEMP
* 4 | BME280_HUM
* 7 | BME280_ALL
*
* @param[out] comp_data : Structure instance of bme280_data.
* @param[in] dev : Structure instance of bme280_dev.
*
* @return Result of API execution status
* @retval zero -> Success / +ve value -> Warning / -ve value -> Error
*/
int8_t bme280_get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data, struct bme280_dev *dev);
/*!
* @brief This API is used to parse the pressure, temperature and
* humidity data and store it in the bme280_uncomp_data structure instance.
*
* @param[in] reg_data : Contains register data which needs to be parsed
* @param[out] uncomp_data : Contains the uncompensated pressure, temperature
* and humidity data.
*/
void bme280_parse_sensor_data(const uint8_t *reg_data, struct bme280_uncomp_data *uncomp_data);
/*!
* @brief This API is used to compensate the pressure and/or
* temperature and/or humidity data according to the component selected by the
* user.
*
* @param[in] sensor_comp : Used to select pressure and/or temperature and/or
* humidity.
* @param[in] uncomp_data : Contains the uncompensated pressure, temperature and
* humidity data.
* @param[out] comp_data : Contains the compensated pressure and/or temperature
* and/or humidity data.
* @param[in] calib_data : Pointer to the calibration data structure.
*
* @return Result of API execution status.
* @retval zero -> Success / -ve value -> Error
*/
int8_t bme280_compensate_data(uint8_t sensor_comp,
const struct bme280_uncomp_data *uncomp_data,
struct bme280_data *comp_data,
struct bme280_calib_data *calib_data);
/*!
* @brief This API is used to calculate the maximum delay in milliseconds required for the
* temperature/pressure/humidity(which ever are enabled) measurement to complete.
* The delay depends upon the number of sensors enabled and their oversampling configuration.
*
* @param[in] settings : contains the oversampling configurations.
*
* @return delay required in milliseconds.
*/
uint32_t bme280_cal_meas_delay(const struct bme280_settings *settings);
#ifdef __cplusplus
}
#endif /* End of CPP guard */
#endif /* BME280_H_ */
/** @}*/